Type II Surge Protection Enclosure with L&N Cable

An enclosed type 2 surge protection device complete with 0.5m of L and N cable. It complies with BS 7671 regulations to protect electronic equipment from transient and switching overvoltages. This device can be installed next to the consumer unit or distribution board and the cable provided can be connected to its main switch. Connect an earth conductor (6mm�) into the earth terminal on the surge protection device and the main earthing terminal in the consumer unit or distribution board (not included). The Line is protected by a Metal Oxide Varistor (MOV) and the neutral by a spark gap device. The Metal Oxide Varistor will degrade each time it deals with high voltage or electromagnetic disturbances, when it is end of life the flag will turn red and the cartridge will require to be changed. At this point the cartridge will fail open circuit and the device will no longer provide surge protection. Simply remove the cartridge and replace with a new cartridge (SPD015D). The rest of the installation will remain unaffected.

• Use to retrofit surge protection to an existing installation
• An end of life indicator signals when it needs replacing
• Earth cable not included