Hyco Speed flow 2kW Storage Water Heater 10L

A ten litre electric water storage heater, for use in cloakrooms, kitchens, offices, shops and domestic premises etc. The temperature can be controlled by means of the dial on the front, heating time is 23 minutes from 10 to 75 degrees Celsius and the flow rate is equivalent to mains pressure. For safety, overheat protection is fitted which needs manual resetting. Supplied pressure relief valve must be fitted in every case (set at 6 bar). Frost protection activates, if required, when the power is on. This is an IPX4 rated, steel tank, glass lined and insulated with a high-density polyurethane foam. Please note it is not suitable for hair washing basins in hairdressing salons. Pressure reducing valve required for pressures above 4.2 bar and expansion vessel and check valve required if cold water draw off nearby. Kits available separately

• 2kW, 10 litre water storage heater


• Heating time 23 minutes


• Neon 'element on' indicator


• Can be used with normal taps, including mixer taps


• 10 litre capacity


• Protection rating IPX4


• Unvented


• Dimensions: 410mm (height) x 310mm (width) x 280mm (depth)