Slick Interconnectable Optical Smoke Alarm

The Kidde 2SFW Interconnectable Optical Smoke Alarm is a mains-powered optical smoke detector 9V battery back up. Part of the Slick range, you can link this product with up to 23 other Kidde and Firex mains alarms. It also comes with a 9V alkaline back-up battery. The product comes complete with an LED display which shows green when the unit is powered and fully functional. It also features a test button for you to test the smoke alarm function regularly and a hush control feature to silence nuisance alarms temporarily. Alarm Status Red LED flashes once every 35 seconds normal operation, flashes rapidly typically once every 2/3 seconds unit sensing a fire event, flashes once every 10 seconds, unit in hush condition, auto reset after 7 minutes. Interconnection Up to 24 units (smoke, heat and CO) can be hardwire interconnected using SMART interconnect system with optional control, up to 15 units can be wireless interconnected using appropriate Wireless Base RF-SFTP. Alarm has a unique fast-fit system, fast push-fit connection, interconnectable, wireless capability and a deep base which allows easier wiring. The slick range requires installation by a professionally qualified electrician and complies with UK Building Regulations for new housing and associated standards (Grade D2, BS5839, Part 6). Comes with 10 year warranty.

• Model 2SFW
• Power supply 230V mains
• Alkaline back-up battery provides continuous operation in the event of mains failure
• Temperature range 0C to +40C
• Humidity range Up to 93% relative humidity (RH) non-condensing
• Storage and transport -20C to +60C and 595% relative humidity (RH) non-condensing
• Alarm dimensions 135 x 135 x 60mm (including Slick mounting base)
• Alarm weight 280g
• Sensor optical chamber with insect-resistant width slot entry inlet portals
• Chamber Size 41mm outside diameter x 16mm approximate depth
• Sensitivity complies with BS EN14604:2005
• Detection Band infrared light wavelength
• Automatic Self-test Circuitry is tested every 40 seconds and unit beeps if fault is detected
• Power Consumption Maximum 80mA
• Battery Back-up User-replaceable alkaline 9V battery (MX1604)
• Low Battery Warning 30-day low battery indicator
• Alarm sounder electronic piezo-electric sounder sound Output 85dB minimum at 3 metres
• Alarm Frequency 3.2 kHz typical
• Base cable connect
• Screwless terminal block with slot release feature for conductors
• Approvals BSI certified to BS EN14604:2005 and CE tested and certified