Enclosure IP55 1200x1200x300mm

Wall mounted, 1200x1200x300 The mild steel double door wall mounted enclosure range, MAD, is ideal for installation in confined spaces where a single door, when opened, would take up too much space in front of the enclosure. The doors' loading capacity also increases as it is divided over two doors. With a IP 55 protection degree, components inside the enclosure are well protected and makes it well suited for many different applications.

• Material: Body: 1.5 mm mild steel


• Gland plate: 1.4 mm mild steel


• Door: 2 mm mild steel Mounting plate: 2 mm galvanized steel / 2.5 mm MAD1001030R5 and above


• Body: Folded and seam welded


• Four 8.5 mm diameter holes for wall fixing, pressed out in 20.4 mm diameter × 2 mm depressions, to allow air circulation around the rear part of the enclosure


• Door: Surface mounted with 130° opening


• Concealed removable hinges with captive pin


• Inner M6 welded studs to mount door profiles MMDP


• Two removable mounting profiles on the right hand door and two on the left hand door


• Sealing is ensured by an injected one piece polyurethane gasket


• Lock: Customized lock with double-bit for easy opening of the door


• Double-bit 3 mm insert and 90° movement


• Espagnolette three point locking


• Other inserts are available as an accessory


• Mounting plate: The mounting plate is marked vertically at 10 mm intervals, for easy horizontal positioning of equipment


• On the top and bottom there are holes to facilitate cable fixing


• Fixed onto M8 press welded studs to the rear of the enclosure


• All sides, from 800 mm and above, are strengthened by folded edges


• By using the AMG accessory, the mounting plate position can be adjusted to any depth


• Gland Plate Opening: Situated at the far rear of the enclosure, to make cabling onto the mounting plate easier


• Protection: IP 55 | TYPE 12, 13 | IK 10


• For outdoor installation, the use of a rain hood ARF and 100% polyester paint coating is recommended


• The corrosion resistance must be taken into consideration


• Finish: RAL 7035 structured powder coating


• Delivery: Enclosure with doors and mounting plate (not included for item numbers ending with PER5)


• Two door mounting profiles on each door


• Gland plate(s) with gasket(s), metallic double-bit 3 mm key, and mounting accessories


• Earthing facilities