Thermostat N/C Red Dial

Thermostat NC heating This adjustable temperature thermostat, ETR, for any enclosure, with either a normally open (NO) or normally closed (NC) contact, is used to control installed devices. Such devices could be a filter fan or a fan heater, that should turn on or off at the required temperature level, set by the user. The result is reduced operational cost.

• Thermostat with NC/NO contacts to manage temperature in panels


• ETR202 with a normally closed contact for regulating heaters


• Sensor element thermostatic bimetal


• Mounting clip for 35 mm DIN rail (EN 60715)


• Material: Plastic according to UL94 V-0


• Setting range: 0 °C to +60 °C


• Switching temperature difference less than 7 °K, and switching point tolerance ±4 °K


• Switch capacity: 240 V AC, 10(2) A


• 120 V AC, 15(2) A


• 24 V DC, 30 W


• Value in brackets for inductive load


• Operating temperature: -20 °C to +80 °C


• Service life: > 100,000 cycles


• Connection: Screw terminal for cable (0.5 to 2.5 mm²)


• Protection: IP 20


• Approvals: CE, EAC, cULus_UL Listed


• Finish: RAL 7035


• Pack quantity: 1 piece